Call or text Kurt anytime on 0466 347 447 or 08 9721 1600 or email email@example.com
Fresh off its recent redesign, the RM-Z250 is ready for battle with a powerful engine and a responsive chassis to deliver superior performance.
The 250 class in motocross doesn’t forgive the slightest weakness. That’s why we completely redesigned the RM-Z250 to achieve a higher level of performance in “Acceleration, Turning, and Braking” necessary to win in this ultra-competitive arena.
Intensive work by our engineers has once again made the RM-Z250 the leader out of the gate, with the engine featuring increased power across the board and class-leading electronics including WiFi tuning capability, a lighter frame and swingarm plus updated KYB suspension for even better handling, modern styling design, and a laundry list of other updates to make it the most potent motocross bike in its class.
Standard with every new MY20 RM-Z250 purchased, the plug and play MX Tuner 2.0 allows users to alter the engine mapping via the intuitive smartphone WiGET app, available on iOS and Android devices.
The WiGET app comes with several pre-installed factory settings for easy tuning for different riding styles and track conditions. For the more experienced tuner, the possibilities are practically endless with the ability to create fully customised maps with specific settings for 36 points of ignition timing and 36 points of fuel injection delivery.
The 49mm KYB coil spring fork replaces the previous model’s PSF2 air fork. Featuring a unique design that provides a progressive damping setup offering excellent compliance over small bumps while firming up deeper into the stroke to handle bigger hits such as harsh jump landings. Upper and lower triple clamp design has been optimised for rigidity while cutting 60 grams.
Out back, the rear suspension linkage ratio has been changed to firm up short stroke movement while optimising longer suspension action for better traction, and is 14.9 grams lighter than previous. The fully adjustable KYB rear shock has an improved range of adjustment with both high and low speed compression and rebound damping. The rear spring is constructed using thinner but stronger wire (feedback from MotoGP technology) and is 370 grams lighter than before.
Centre-port cylinder head design contributes to increased output and throttle response by approximately 5%.
The fuel injection system now features two injectors. Instead of using a single injector that can compromise low-end fuelling in order to supply enough fuel for top-end power, the primary injector delivers precise low-rpm fuelling while a secondary injector at higher rpm provides the extra fuel needed.
Increased by 17% over the previous model and promotes the effective mixing of air and fuel, resulting in improved throttle response.
All the power in the world won’t do any good if you can’t transfer it to the ground, and Suzuki’s innovative electronics work transparently with the rider for maximum acceleration on any type of dirt or track conditions. Suzuki’s third-generation traction management system, with a significantly updated S-HAC (Suzuki Holeshot Assist Control) system and more powerful ECM (engine control module).Suzuki’s RM-Z250 goes another step further with the fourth-generation system featuring updated ECU software. The RM-Z250’s S-HAC system monitors throttle position and gear position in order to adjust ignition timing for maximum acceleration through the three critical stages of a motocross start: releasing the clutch, getting drive over the starting gate, and then powering down the start straight.
Three settings are available
A-mode: intended for hardpack surfaces where controlling wheelspin is paramount.
B-mode: for normal dirt conditions with good traction.
OFF: For normal unassisted take-offs.
DISPLACEMENT – 249cc
ENGINE – Single cylinder, liquid-cooled, DOHC
STARTER – Primary Kick
TRANSMISSION – 5-speed, constant mesh
FRONT SUSPENSION – 48mm KYB dual-chamber inverted spring fork, adjustable compression and rebound damping
REAR SUSPENSION – Link type, KYB shock with adjustable high and low compression and rebound damping and spring preload
FRONT BRAKES – Nissin twin-piston caliper, 270mm wave disc
REAR BRAKES – Nissin single-piston caliper, 240mm wave disc
FUEL CAPACITY – 6.3L
SEAT HEIGHT – 955mm
LENGTH – 2185mm
WIDTH – 835mm
HEIGHT – 1255mm
WHEELBASE – 1485mm
WET WEIGHT – 106Kg
WARRANTY – N/A
MODEL CODE – RM-Z250M0